Enjoy 20% off your complete board with the board customiser.
Setup option
How should this board arrive?
Parts and Size Guide
Introduction
Picking the right board.
Picking your first board can feel overwhelming - so many parts and sizes. I've been there too, so this guide keeps it simple. If you are stuck, message me on the contact page, I will be happy to help :)
Deck size recommendation
US Men’s shoe sizeDeck widthRecommended for
6 and below7.25-7.675"Kids
7-87.75-7.875"Teens
9-108.0-8.125"Most adults
11-128.25-8.375"Adults with bigger feet
13+8.5"+Bigger feet or transition
Griptape
Most griptape comes in a standard sheet size and fits a normal skateboard deck. Some sheets feel a little rougher than others, but for most beginners the difference is small, so choosing the design you like is totally fine.
Trucks
Good news: this customizer handles truck fit for you. Choose a deck and only trucks that fit that deck will be shown. You can also use a skate tool to adjust truck tightness: tighter feels steadier, while looser turns more easily.
Build type
Standard
Solid axle and kingpin. Simple, strong, and fine for most first setups.
Single Hollow
The kingpin is hollow, which saves a bit more weight.
Double hollow
Both the axle and kingpin are hollowed out, making the truck lighter again.
Truck sizeDeck fit
5.0"1297.5-7.75"
5.25"1397.875-8.125"
5.5"1448.125-8.375"
5.75"1498.375-8.625"
Truck sizing names can vary by brand, so do not stress too much about the numbers. The customizer will keep the fitting parts together.
Wheels
For wheels, the two main things are size and hardness. Size changes height and roll feel, while hardness changes grip and smoothness. Most skateboard wheels are around 51-54mm.
Size
51-52mmStandard sizing
53-54mmBigger - good if you skate bowls or want your wheels to last slightly longer.
Hardness (higher number = harder wheel)
78ASoft - Cruising only
98A-99AMedium-hard - Tricks
100A-101AHard - Tricks, easier to powerslide
Bearings
To be honest, any decent bearings are fine for most beginners. Once they break in, they usually spin fast enough.
Hardware
Skateboard hardware is standardized, so choosing by color is usually fine.
Skate tool
A skate tool is the one tool I strongly recommend for a first setup. It can adjust trucks, tighten axle nuts, build a board, replace parts, and take almost everything apart when it is time for maintenance.
Still confused?
If you are still unsure, I am happy to help you choose the right setup. Send me a message through the contact page and I will point you in the right direction.
